1 p-channel 1 0 0-v (d-s) mosfet features ? halogen-free acco r ding to iec 61249-2-21 available ? trenchfet ? power mosfet ? ultra low on-resistance ? small size applications ? a cti ve clamp circuits in dc/dc power supplies product summary v ds (v) r ds(on ) ( )i d (a) q g (typ .) - 1 0 0 1.2 at v gs = - 10 v - 0.69 7.7 1.3 at v gs = - 6.0 v - 0.66 dts100 3 g s d top vie w 2 3 to-236 (sot -23) 1 notes: a. surfa ce mou nted on 1" x 1" fr4 board. b. pulse w idth limited by maximum junction temperature. absolute maximum ratings t a = 25 c , unless otherwise noted parameter symbol 5 s steady state unit drain-source voltage v ds - 1 00 v gate-source v o ltage v gs 20 continuous dr ain current (t j = 150 c) a, b t a = 25 c i d - 0.69 - 0.53 a t a = 70 c - 0.55 - 0.43 pulsed dr a i n current i dm - 1.6 contin uous sou r ce current (d iode conduction) a, b i s - 1.0 - 0.6 single pulse av alanche current l = 1.0 mh i as 4.5 single pulse avalanche energ y e as 1.01 mj maxim u m power dissipation a, b t a = 25 c p d 1.25 0.75 w t a = 70 c 0.8 0.48 oper ating junction and storage temperature range t j , t stg - 55 to 150 c thermal resistance rat i ngs p arameter symb ol t ypical maximum uni t maxim um junction-to-ambient a t 5 s r thja 75 100 c/w stea dy state 120 166 maxim um junction-to-foot (drain) steady state r thjf 40 50 www.din-tek.jp dt s 1003
2 note s : a. p ulse test: pw 300 s duty cycle 2 %. b. for design aid only, not subject to production testing. c. switch ing time is essentially independent of operating temperature. stresses b e yond those listed under ?absolute maximum ratings? ma y cause permanent damage to the device. these are stress rating s only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. exposure to absolute maximum rating conditions for extended periods may affect device reliability. specifications t j = 25 c , unless otherwise noted p aram eter sym bol t est conditions limits unit min. typ. max. static drain-source breakdo wn v olta ge v (br)dss v gs = 0 v, i d = - 250 a - 1 00 v gate-threshold voltage v gs(t h) v ds = v gs , i d = - 250 a - 2.5 - 4.5 gate-body leakage i gss v ds = 0 v, v gs = 20 v 100 na z ero gate voltage drain current i dss v ds = - 150 v, v gs = 0 v - 1 a v ds = - 150 v, v gs = 0 v, t j = 55 c - 10 on-state dr ain current a i d(on ) v ds - 15 v , v gs = 10 v - 1 . 6 a drain-source on-resistance a r ds(on) v gs = - 10 v, i d = - 0.5 a 1.0 1.2 v gs = - 6.0 v , i d = - 0.5 a 1.05 1.3 f orw ard t ransconductance a g fs v ds = - 15 v , i d = - 0.5 a 2.2 s diode f orw ard voltage v sd i s = - 1.0 a, v gs = 0 v 0.7 - 1.2 v dynami c b total gate charge q g v ds = - 75 v, v gs = 10 v, i d ? - 0.5 a 7.7 12 nc gate-so u rce charge q gs 1.5 gate-dra in charge q gd 2.5 gate re si stance r g f = 1.0 m hz 9 input capacitance c iss v ds = - 25 v , v gs = 0 v, f = 1 mhz 340 510 pf output c apacitance c oss 30 reverse t r ansfer capacitance c rss 16 switching c tu r n - o n t i m e t d(on) v dd = - 75 v , r l = 75 i d ? - 1.0 a, v gen = - 10 v r g = 6 711 ns t r 11 17 tur n -off time t d(off) 16 25 t f 11 17 body diode rev erse r ecovery charge q rr i f = 0.5 a, di/dt = 100 a/s 90 135 nc www.din-tek.jp dt s 1003
3 typica l c har ac teristics 25 c, unless otherwise noted output characteristics on-resistance vs. drain current gate charge 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0246810 v gs = 10 thru 5 v 3 v v ds - drain-to-source v oltage (v) - drain current (a) i d 4 v 0.00 0.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 v gs = 6 v v gs = 10 v - on-resistance ( ) r ds(on) i d - drain current (a) 0 2 4 6 8 10 01234567 8 v ds = 75 v i d = 0.5 a - gate-to-source voltage (v) q g - total gate charge (nc) v gs transfer characte ristics capacitance on-resistance vs. junction temperature 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 012345 25 c - 55 c v gs - gate-to-source v oltage (v) - drain current (a) i d t c = 125 c 0 100 200 300 400 500 0 30 60 90 1 0 0 1 1 0 c rss c oss c iss v ds - drain-to-source v oltage (v) c - capacitance (pf) 0.0 0.5 1.0 1.5 2.0 2.5 - 50 - 25 0 25 50 75 100 125 150 v gs = 10 v i d = 0.5 a t j - junction t emper ature (c) r ds(on) - on-resistance (normaliz ed) www.din-tek.jp dt s 1003
4 ty pi cal ch ara cteristics 25 c, unless otherwise noted source-drain dio de forward voltage threshold voltage 1.0 1.4 0.1 1 3 0 0.2 0.4 0.6 0.8 t j = 150 c v sd - source-to-dr ain voltage (v) - source current (a) i s t j = 25 c 1.2 - 0.5 - 0.2 0.1 0.4 0.7 1.0 1.3 - 50 - 25 0 25 50 75 85 9 5 1 0 0 i d = 250 a variance (v) v gs(th) t j - temper ature (c) on-resistance vs. gate-to-sou rce voltage single pulse power 0.0 0.5 1.0 1.5 2.0 2.5 3.0 02468 10 i d = 0.5 a - on-resistance ( ) r ds(on) v gs - gate-to-source v oltage (v) 0.01 0 1 6 12 2 4 10 600 0.1 power (w) time (s) 8 10 100 t a = 25 c safe operating area 10 0.1 0.1 1 10 1000 0.001 1 t a = 25 c single pulse - drain current (a) i d 0.01 i d(on) limited ds(on) * limited by r bvdss limited v ds - drain-to-source v oltage (v) * v gs > minimum v gs at which r ds(on) is specified 1 ms 10 ms 100 ms 100 s, dc 100 s 10 s, 1 s 100 i dm limited 10 s www.din-tek.jp dt s 1003
5 . normalized th ermal t ransient impedance, junction-to-ambient square w a ve pulse duration (s) nor maliz ed ef f ective transient thermal impedance 2 1 0.1 0.01 10 -3 10 -2 1 10 600 10 -1 10 -4 duty cycle = 0.5 0.2 0.1 0.05 0.02 single pulse 100 1. duty cycle , d = 2. p er unit base = r thja = 120 c/w 3. t jm - t a = p dm z thja (t) t 1 t 2 t 1 t 2 notes: 4. surface mounted p dm th e rm a l ratings (t a = 25 c, un le ss ot he rwi se no ted) www.din-tek.jp dt s 1003
1 sot-23 ( t o-236): 3-lead b e e 1 1 3 2 s e e 1 d a 2 a a 1 c s e a ting pla ne 0.10 mm 0.004" c c l 1 l q g au ge pl a ne s e a ting pla ne 0.25 mm dim millimet ers inches mi n max mi n max a 0 .89 1.12 0.0 35 0.044 a 1 0 .01 0.10 0.0004 0.004 a 2 0 .88 1.02 0.0 346 0.040 b 0. 35 0.50 0.014 0.020 c 0.085 0.18 0.00 3 0.007 d 2.80 3.04 0.110 0.120 e 2.10 2.64 0.08 3 0.104 e 1 1 .20 1.40 0.047 0.055 e 0.95 bsc 0.0 3 74 ref e 1 1.90 bsc 0.0 748 ref l 0 .40 0.60 0.016 0.024 l 1 0.6 4 ref 0. 025 ref s 0.50 ref 0.020 ref q 3 8 38 ecn: s-0 3 946-rev. k, 09-jul-01 dwg: 5479 package information www.din-tek.jp
1 application note rec ommended minimum pads for sot-23 0.106 (2.692) recommended mi nimum pads dimensions in inches/(mm) 0.022 (0.559) 0.049 (1.245) 0.029 (0.724) 0.037 (0.950) 0.053 (1.341) 0.097 (2.459) return to index r etur n to index application note www.din-tek.jp
1 disclaimer all prod uct, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. din-tek intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, din-tek ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. din-tek makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, din-tek disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on din-tek s knowledge of typical requirements that are often placed on din-tek products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify din-tek s terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, din-tek products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the din-tek product could result in personal injury or death. customers using or selling din-tek products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized din-tek personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of din-tek . product names and markings noted herein may be trad emarks of their respective owners. material category policy din-tek intertech nology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some din-tek documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. din-tek intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some din-tek documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards. legal disclaimer notice www.din-tek.jp
|
